Hydrogen Gas Alarm hydrogen detect

World's Best Wind Turbine

 

ÝScorpion Wind Turbines
ÝGhost Wind Turbines
ÝFireBird® Wind Turbines
ÝWind Slave Wind Turbines
ÝCAL Condor Wind Turbines
ÝCAL CommanderTurbines
ÝHappy Customers
ÝWind Farm and Grid Tie
ÝInstallation guide / AC
ÝSolar only $1.00 per Watt
ÝGrid Tie Inverters
ÝBlades / Propellers
ÝMounting Brackets &Tails
ÝBattery Regulator
ÝHot Water Immersion Heat
ÝElements Low Voltage
ÝHot water thermostats
ÝMarine Coating System
ÝPMA's & Parts
ÝSlant Core PMA
ÝPower Core PMA
ÝSuper Core PMA
Ý
ÝMANTA
ÝOhms law calculator
ÝAll Rights Reserved
Ý2011®© Disclaimer
This unit is a full range explosive
air and deadly gas danger alarm!
 
(All-Gas® Including Hydrogen)
 
All Dangerous Gas Detector
All Dangerous Gas Alarm
All Dangerous Gas Sensorns
or H2 Hydrogen Gas detector Hydrogen gas sensor Hydrogen Gas Alarm H2 gas alarm Hydrogen gas sensor
This unit is a full range explosive air and deadly gas danger alarm!
 
(All-Gas® Including Hydrogen)
 
All Dangerous Gas Detector
All Dangerous Gas Alarm
All Dangerous Gas Sensorns
 
For all flammable or combustible
gases, vapors and smoke!
This is basically a danger alarm!o
 
"When this alarm goes off you know it's time to leave
the building! Great for anti-terrorism and public safety"
Great for sensing invisible threats.
 
Protect your home, office, boat and RV from
explosive gases, vapors, dangerous air and smoke.
 
Smoke/hydrocarbons
Methane
Hydrogen
Natural gas
Propane gas
Alcohol in air
Gasoline in air
Kerosene in air
Hydrogen Cyanide
Flammable solvents in air (Detects most hydrocarbons)
 
Model #ALL110 - 110/120 Volt AC Version
This is a full spectrum gas danger alarm.
 
When flammable gas and vapors are leaking
the #ALL110 series alarm will let you know it fast!
 
Place close to the ceiling when sensing H2, natural gas and smoke since they rise.
Place close to the floor when sensing for propane and other heavy gases.
Place close to the ceiling when sensing flammable fumes since they rise.
For maximum protection buy two and place one at floor level and one at ceiling level.

 
Features a loud 80 Db alarm and 10 amp relay that are both
activated when vapor or gas levels reach as low as 100 PPM or higher.
 
Specifications:
Power consumption 3 watts.
10 amp relay* for activating central alarms, sirens or closing gas valves (Normally open - Closed on alarm)
Auto reset at < 50 ppm gas or vapor plus up to 15 minutes to clear saturation from element.
Includes 3 foot cord for direct wire or for your own 110 VAC plug-in option.
Response time / 20 seconds for 250+ PPM - 2 seconds for 2000+ PPM
Temperature operation range - 7 to 118 degrees F.
Operation range (Humidity) - 0% to 95% max.
Flash proof wire screen for anti-ignition safety.
Sensor / catalyst wire and plate type.
 
Control Panel:
Red relay-on light,
Green power-on light.
Yellow fault light. (Indicates trouble with the sensor)
Yellow warm up light. (60 seconds warm up time when plugged in)
Warm up time bypass button. (For instant sensing on plug in)
Relay test button.
 
*Relay not to be used for running fans, motors or inductive loads. Use a slave relay for higher amp loads!!!!!!!!
 
Model #ALL110 -
110 volt AC powered All Gas Alarm with
relay only $119.95 - plus $22.90 S&H each.
 
 
PLACE YOUR ORDER ON OUR SITE TODAY! CLICK HERE - OR USE THE SHOPPING CART BUTTON ABOVE
 
Custom made 9 VDC, 12 VDC and 220 VAC volt units can be made (100 piece min. order !
 
 

 

For HYDROGEN GAS ONLY DETECTORS Click here

 

Questions??? For Fast Email Service Email Us Please.
 
For FAST Technical Support Please Email Us Now!
 
and CHECK OUT

 

NO PAPER company policy. We have no written literature.
Over 175,000,000 tons of paper and other wood products are dumped into landfills annually world over.
We offer only non-polluting electronically generated information that is served here on this web site.
 

lar